Instructions:

HOW TO APPLY SPA.GIENE
Using the 1 Litre Auto Measure Chamber Pack

STAFF TRAINING PROCEDURE

For training purposes we recommend you use tap water.

  • With label facing you unscrew the left hand side cap and add water into the auto measure bottle.
  • Screw cap on tight.
  • Read through instructions on label.
  • Undo right hand side chamber cap slightly (½ turn) to help fill reservoir).
  • Gently squeeze bottle and slowly fill the chamber watching the liquid rise up the side cylinder and into the reservoir. Stop at 50ml.
  • Allow all cleaning staff to practice this procedure, most will spill on first attempt.
  • Take the chamber cap off and pour 50ml dose into the bath as directed.
  • Place cap back on chamber and screw on tight.

(Training CD’s/videos are available.)

Notes to remember

  • When training staff, fill the auto measure bottles with tap water.
  • Right hand side Chamber cap to be loose (½ turn) just enough to avoid spillage on skin or eyes.
  • Remember – A gentle and slow squeeze. Watch the SPA.GIENE all the way into the chamber
  • Refer dosage chart.
SPA.GIENE IS RECOMMENDED FOR THE FOLLOWING USE
Spa Baths - 50ml
Spa Pools - 100ml per 400 litres of water
Spray & Wipe - 1:4 - 100ml SPA.GIENE in Spray & Wipe bottle
Bath Polish - Same as SPRAY & WIPE
Auto Dishwashers - 50ml
Domestic Top Loader - 50ml
Washing Machines -  

 

Spagiene Promotional Video - for home use.

Commercial Training Video (Hotels)